Fundamental of Civil Engineering Construction - Lecture 6

-
Fundamental of Civil Engineering
Construction

Lecture 6

Download - click here

Comments

Post a Comment

Popular posts from this blog

Tacheometric Surveying

-
Image
Tacheometric Surveying   Download - Click Here Dr.Gunathilaka M.D.E.K. Senior Lecturer  Department of Surveying and Geodesy Faculty of Geomatics Sabaragamuwa University of Sri Lanka. 70140, Belihuloya. Branch of surveying in which both horizontal & vertical distances between stations are determined from instrumental observations (Agor, 1996). Uniqueness! No need of slope corrections, tension, etc... since no chaining involved. Rapid & convenient Good for rugged terrains with deep valleys, mountains, across water bodies... But low accuracy... Purpose; Preparation of contour plans with details. Widely used in preliminary site locating for railways, roads, canals, reservoirs, etc...  
Read more

7 LAB TESTS ON AGGREGATE TO CHECK QUALITY FOR USE IN ROAD WORK

-
Image
Tests on Aggregate Aggregate plays an important role in pavement construction. Aggregates influence, to a great extent, the load transfer capability of pavements. Hence it is essential that they should be thoroughly tested before using for construction. Not only that aggregates should be strong and durable, they should also possess proper shape and size to make the pavement act monolithically. Aggregates are tested for strength, toughness, hardness, shape, and water absorption. In order to decide the suitability of the aggregate for use in pavement construction, following tests are carried out: Crushing test Abrasion test Impact test Soundness test Shape test Specific gravity and water absorption test Bitumen adhesion test 1. Crushing Test Fig-1 Crushing Test Setup One of the model in which pavement material can fail is by crushing under compressive stress. A test is standardized by IS: 2386 part-IV and used to determine the crushing strength of aggregates. Th...
Read more

Engineering Graphics and AutoCAD

-
Image
Engineering Graphics and AutoCAD lecture notes   Download - Click Here LOCUS It is a path traced out by a point moving  in a plane, in a particular manner, for one  cycle of operation. The Cycloid The cycloid is the locus of a point on the circumference of a circle as the circle rolls, without  slipping, along a straight line. The Involute There are several definitions for the involute, none being particularly easy to follow. An involute is the locus of a point, initially on a base circle, which moves so that its straight- line distance, along a tangent to the circle, to the tangential point of contact, is equal to the  distance along the arc of the circle from the initial point to the instant point of tangency. Alternatively, the involute is the locus of a point on a straight line when the straight line rolls  round the circumference of a circle without slipping. The involute is best visualised as the path traced out by the end of...
Read more